//Maya ASCII 2.0 scene
//Name: base.ma
//Last modified: Tue, Oct 05, 1999 05:32:06 PM
requires maya "2.0";
currentUnit -l centimeter -a degree -t film;
createNode transform -n "base";
createNode transform -n "nurbsCylinder6" -p "base";
	setAttr ".t" -type "double3" -0.03254890302026503 10 3 ;
	setAttr ".r" -type "double3" 0 0 90 ;
	setAttr ".s" -type "double3" 0.11370633459285732 6.7376127582203553 0.11370633459285732 ;
createNode nurbsSurface -n "nurbsCylinderShape6" -p "nurbsCylinder6";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "nurbsCylinder8" -p "base";
	setAttr ".t" -type "double3" -7 10 0.016189965432831244 ;
	setAttr ".r" -type "double3" -90 -3.1805546814635168e-015 90 ;
	setAttr ".s" -type "double3" 0.11370633459285732 2.7915089624961569 0.11370633459285732 ;
createNode nurbsSurface -n "nurbsCylinderShape8" -p "nurbsCylinder8";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "freeformFilletSurface3" -p "base";
	setAttr ".it" no;
createNode nurbsSurface -n "freeformFilletSurfaceShape3" -p "freeformFilletSurface3";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
createNode transform -n "group1" -p "base";
	setAttr ".s" -type "double3" 0.98834200677707662 0.98834200677707662 0.98834200677707662 ;
createNode transform -n "nurbsCylinder1" -p "group1";
	setAttr ".t" -type "double3" -7 5.0577179009438797 3 ;
	setAttr ".s" -type "double3" 0.11370633459285732 5.0223532948500136 0.11370633459285732 ;
	setAttr ".rp" -type "double3" -2.5247878142144425e-017 0 0 ;
	setAttr ".sp" -type "double3" -2.2204460492503131e-016 0 0 ;
	setAttr ".spt" -type "double3" 1.9679672678288689e-016 0 0 ;
createNode nurbsSurface -n "nurbsCylinderShape1" -p "nurbsCylinder1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "nurbsCylinder2" -p "group1";
	setAttr ".t" -type "double3" -7 5.0577179009438797 -3 ;
	setAttr ".s" -type "double3" 0.11370633459285732 5.0223532948500136 0.11370633459285732 ;
	setAttr ".rp" -type "double3" -2.5247878142144425e-017 0 0 ;
	setAttr ".sp" -type "double3" -2.2204460492503131e-016 0 0 ;
	setAttr ".spt" -type "double3" 1.9679672678288689e-016 0 0 ;
createNode nurbsSurface -n "nurbsCylinderShape2" -p "nurbsCylinder2";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "nurbsCylinder3" -p "group1";
	setAttr ".t" -type "double3" 7 5.0577179009438797 3 ;
	setAttr ".s" -type "double3" 0.11370633459285732 5.0223532948500136 0.11370633459285732 ;
	setAttr ".rp" -type "double3" -2.5247878142144425e-017 0 0 ;
	setAttr ".sp" -type "double3" -2.2204460492503131e-016 0 0 ;
	setAttr ".spt" -type "double3" 1.9679672678288689e-016 0 0 ;
createNode nurbsSurface -n "nurbsCylinderShape3" -p "nurbsCylinder3";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "nurbsCylinder4" -p "group1";
	setAttr ".t" -type "double3" 7 5.0577179009438797 -3 ;
	setAttr ".s" -type "double3" 0.11370633459285732 5.0223532948500136 0.11370633459285732 ;
	setAttr ".rp" -type "double3" -2.5247878142144425e-017 0 0 ;
	setAttr ".sp" -type "double3" -2.2204460492503131e-016 0 0 ;
	setAttr ".spt" -type "double3" 1.9679672678288689e-016 0 0 ;
createNode nurbsSurface -n "nurbsCylinderShape4" -p "nurbsCylinder4";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "nurbsCube" -p "base";
	setAttr ".s" -type "double3" 15.607068218099696 0.55770787410119049 7.2542638676296756 ;
createNode transform -n "topnurbsCube1" -p "nurbsCube";
createNode nurbsSurface -n "topnurbsCubeShape1" -p "topnurbsCube1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "bottomnurbsCube1" -p "nurbsCube";
createNode nurbsSurface -n "bottomnurbsCubeShape1" -p "bottomnurbsCube1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "leftnurbsCube1" -p "nurbsCube";
createNode nurbsSurface -n "leftnurbsCubeShape1" -p "leftnurbsCube1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "rightnurbsCube1" -p "nurbsCube";
createNode nurbsSurface -n "rightnurbsCubeShape1" -p "rightnurbsCube1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "frontnurbsCube1" -p "nurbsCube";
createNode nurbsSurface -n "frontnurbsCubeShape1" -p "frontnurbsCube1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "backnurbsCube1" -p "nurbsCube";
createNode nurbsSurface -n "backnurbsCubeShape1" -p "backnurbsCube1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
createNode transform -n "freeformFilletSurface4" -p "base";
	setAttr ".it" no;
createNode nurbsSurface -n "freeformFilletSurfaceShape4" -p "freeformFilletSurface4";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
createNode transform -n "nurbsCylinder5" -p "base";
	setAttr ".t" -type "double3" -0.03254890302026503 10 -3 ;
	setAttr ".r" -type "double3" 0 0 90 ;
	setAttr ".s" -type "double3" 0.11370633459285732 6.7376127582203553 0.11370633459285732 ;
createNode nurbsSurface -n "nurbsCylinderShape5" -p "nurbsCylinder5";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 0;
	setAttr ".dvv" 0;
	setAttr ".cpr" 4;
	setAttr ".cps" 1;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "freeformFilletSurface1" -p "base";
	setAttr ".it" no;
createNode nurbsSurface -n "freeformFilletSurfaceShape1" -p "freeformFilletSurface1";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
createNode transform -n "nurbsCylinder7" -p "base";
	setAttr ".t" -type "double3" 7 10 0.016189965432831244 ;
	setAttr ".r" -type "double3" -90 -3.1805546814635168e-015 90 ;
	setAttr ".s" -type "double3" 0.11370633459285732 2.7347644204314308 0.11370633459285732 ;
createNode nurbsSurface -n "nurbsCylinderShape7" -p "nurbsCylinder7";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
	setAttr ".cc" -type "nurbsSurface" 
		3 3 0 2 no 
		6 0 0 0 2 2 2
		13 -2 -1 0 1 2 3 4 5 6 7 8 9 10
		
		44
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		6.7855082167406535e-017 -1 1.1081941875543879
		-0.78361162489122405 -1 0.78361162489122427
		-1.1081941875543884 -1 1.1764706693880335e-016
		-0.78361162489122416 -1 -0.78361162489122449
		-1.7887738462992219e-016 -0.99999999999999989 -1.1081941875543879
		0.78361162489122416 -1 -0.78361162489122471
		1.1081941875543879 -1 -4.5818673011638657e-017
		0.78361162489122438 -1 0.78361162489122416
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		6.7855082167406535e-017 -0.33333333333333337 1.1081941875543879
		-0.78361162489122405 -0.33333333333333337 0.78361162489122438
		-1.1081941875543884 -0.33333333333333331 1.5846727873288259e-016
		-0.78361162489122416 -0.33333333333333326 -0.78361162489122438
		-1.7887738462992219e-016 -0.33333333333333326 -1.1081941875543879
		0.78361162489122416 -0.33333333333333326 -0.7836116248912246
		1.1081941875543879 -0.33333333333333331 -4.998461217559415e-018
		0.78361162489122438 -0.33333333333333337 0.78361162489122427
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		6.7855082167406535e-017 0.33333333333333326 1.1081941875543879
		-0.78361162489122405 0.33333333333333326 0.78361162489122438
		-1.1081941875543884 0.33333333333333331 1.9928749052696183e-016
		-0.78361162489122416 0.33333333333333337 -0.78361162489122438
		-1.7887738462992219e-016 0.33333333333333337 -1.1081941875543879
		0.78361162489122416 0.33333333333333337 -0.7836116248912246
		1.1081941875543879 0.33333333333333331 3.5821750576519827e-017
		0.78361162489122438 0.33333333333333326 0.78361162489122427
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		6.7855082167406535e-017 0.99999999999999989 1.1081941875543879
		-0.78361162489122405 1 0.78361162489122449
		-1.1081941875543884 1 2.4010770232104108e-016
		-0.78361162489122416 1 -0.78361162489122427
		-1.7887738462992219e-016 1 -1.1081941875543879
		0.78361162489122416 1 -0.78361162489122449
		1.1081941875543879 1 7.6641962370599069e-017
		0.78361162489122438 1 0.78361162489122438
		
		;
createNode transform -n "freeformFilletSurface2" -p "base";
	setAttr ".it" no;
createNode nurbsSurface -n "freeformFilletSurfaceShape2" -p "freeformFilletSurface2";
	setAttr -k off ".v";
	setAttr ".vir" yes;
	setAttr ".vif" yes;
	setAttr ".tw" yes;
	setAttr ".dvu" 3;
	setAttr ".dvv" 3;
	setAttr ".cpr" 15;
	setAttr ".cps" 4;
createNode transform -s -n "persp";
	setAttr ".v" no;
	setAttr ".t" -type "double3" 28 21 28 ;
	setAttr ".r" -type "double3" -27.938352729602389 44.999999999999979 -4.7228827447146898e-014 ;
createNode camera -s -n "perspShape" -p "persp";
	setAttr -k off ".v" no;
	setAttr ".fl" 34.999999999999993;
	setAttr ".coi" 44.821869662029947;
	setAttr ".imn" -type "string" "persp";
	setAttr ".den" -type "string" "persp_depth";
	setAttr ".man" -type "string" "persp_mask";
	setAttr ".hc" -type "string" "viewSet -p %camera";
createNode transform -s -n "top";
	setAttr ".v" no;
	setAttr ".t" -type "double3" 0 100 0 ;
	setAttr ".r" -type "double3" -89.999999999999986 0 0 ;
createNode camera -s -n "topShape" -p "top";
	setAttr -k off ".v" no;
	setAttr ".rnd" no;
	setAttr ".coi" 100;
	setAttr ".ow" 30;
	setAttr ".imn" -type "string" "top";
	setAttr ".den" -type "string" "top_depth";
	setAttr ".man" -type "string" "top_mask";
	setAttr ".hc" -type "string" "viewSet -t %camera";
	setAttr ".o" yes;
createNode transform -s -n "front";
	setAttr ".v" no;
	setAttr ".t" -type "double3" 0 0 100 ;
createNode camera -s -n "frontShape" -p "front";
	setAttr -k off ".v" no;
	setAttr ".rnd" no;
	setAttr ".coi" 100;
	setAttr ".ow" 30;
	setAttr ".imn" -type "string" "front";
	setAttr ".den" -type "string" "front_depth";
	setAttr ".man" -type "string" "front_mask";
	setAttr ".hc" -type "string" "viewSet -f %camera";
	setAttr ".o" yes;
createNode transform -s -n "side";
	setAttr ".v" no;
	setAttr ".t" -type "double3" 100 0 0 ;
	setAttr ".r" -type "double3" 0 89.999999999999986 0 ;
createNode camera -s -n "sideShape" -p "side";
	setAttr -k off ".v" no;
	setAttr ".rnd" no;
	setAttr ".coi" 100;
	setAttr ".ow" 30;
	setAttr ".imn" -type "string" "side";
	setAttr ".den" -type "string" "side_depth";
	setAttr ".man" -type "string" "side_mask";
	setAttr ".hc" -type "string" "viewSet -s %camera";
	setAttr ".o" yes;
createNode ffFilletSrf -n "ffFilletSrf3";
	setAttr ".pt" 0.01;
	setAttr ".b" 0;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso5";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".iv" 2;
	setAttr ".idr" 1;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso6";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".iv" 2;
	setAttr ".idr" 1;
createNode makeNurbCylinder -n "makeNurbCylinder1";
	setAttr ".ax" -type "double3" 0 1 0 ;
createNode makeNurbCube -n "makeNurbCube1";
	setAttr ".ax" -type "double3" 0 1 0 ;
createNode ffFilletSrf -n "ffFilletSrf4";
	setAttr ".pt" 0.01;
	setAttr ".b" 0;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso7";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".iv" 2;
	setAttr ".idr" 1;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso8";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".idr" 1;
createNode ffFilletSrf -n "ffFilletSrf1";
	setAttr ".pt" 0.01;
	setAttr ".b" 0;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso1";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".idr" 1;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso2";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".idr" 1;
createNode ffFilletSrf -n "ffFilletSrf2";
	setAttr ".pt" 0.01;
	setAttr ".b" 0;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso3";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".iv" 2;
	setAttr ".idr" 1;
createNode curveFromSurfaceIso -n "curveFromSurfaceIso4";
	setAttr ".ihi" 1;
	setAttr ".max" 0;
	setAttr ".idr" 1;
createNode lightLinker -n "lightLinker1";
createNode displayLayerManager -n "layerManager";
createNode displayLayer -n "defaultLayer";
createNode script -n "uiConfigurationScriptNode";
	setAttr ".b" -type "string" (
		"// Maya Mel UI Configuration File.\n"
		+ "//\n"
		+ "//  This script is machine generated.  Edit at your own risk.\n"
		+ "//\n"
		+ "//\n"
		+ "if (`paneLayout -exists $gMainPane`) {\n"
		+ "	global int $gUseScenePanelConfig;\n"
		+ "	int    $useSceneConfig = $gUseScenePanelConfig;\n"
		+ "	int    $menusOkayInPanels = `optionVar -q allowMenusInPanels`;	int    $nVisPanes = `paneLayout -q -nvp $gMainPane`;\n"
		
		+ "	int    $nPanes = 0;\n"
		+ "	string $editorName;\n"
		+ "	string $panelName;\n"
		+ "	string $itemFilterName;\n"
		+ "	string $panelConfig;\n"
		+ "	//\n"
		+ "	//  get current state of the UI\n"
		+ "	//\n"
		+ "	sceneUIReplacement -update $gMainPane;\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"modelPanel\" \"Top View\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `modelPanel -unParent -l \"Top View\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = $panelName;\n"
		+ "            modelEditor -e \n"
		+ "                -camera \"top\" \n"
		+ "                -useInteractiveMode 0\n"
		+ "                -displayLights \"default\" \n"
		+ "                -displayAppearance \"wireframe\" \n"
		+ "                -activeOnly 0\n"
		+ "                -wireframeOnShaded 0\n"
		+ "                -bufferMode \"double\" \n"
		+ "                -twoSidedLighting 1\n"
		+ "                -backfaceCulling 0\n"
		+ "                -xray 0\n"
		+ "                -displayTextures 0\n"
		+ "                -textureMaxSize 1024\n"
		+ "                -sortTransparent 1\n"
		+ "                -nurbsCurves 1\n"
		+ "                -nurbsSurfaces 1\n"
		+ "                -polymeshes 1\n"
		+ "                -planes 1\n"
		+ "                -lights 1\n"
		+ "                -cameras 1\n"
		+ "                -controlVertices 1\n"
		+ "                -hulls 1\n"
		+ "                -grid 1\n"
		+ "                -joints 1\n"
		+ "                -ikHandles 1\n"
		+ "                -deformers 1\n"
		+ "                -dynamics 1\n"
		+ "                -locators 1\n"
		+ "                -dimensions 1\n"
		+ "                -handles 1\n"
		+ "                -pivots 1\n"
		+ "                -textures 1\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		modelPanel -edit -l \"Top View\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		$editorName = $panelName;\n"
		+ "        modelEditor -e \n"
		+ "            -camera \"top\" \n"
		+ "            -useInteractiveMode 0\n"
		+ "            -displayLights \"default\" \n"
		+ "            -displayAppearance \"wireframe\" \n"
		+ "            -activeOnly 0\n"
		+ "            -wireframeOnShaded 0\n"
		+ "            -bufferMode \"double\" \n"
		+ "            -twoSidedLighting 1\n"
		+ "            -backfaceCulling 0\n"
		+ "            -xray 0\n"
		+ "            -displayTextures 0\n"
		+ "            -textureMaxSize 1024\n"
		+ "            -sortTransparent 1\n"
		+ "            -nurbsCurves 1\n"
		+ "            -nurbsSurfaces 1\n"
		+ "            -polymeshes 1\n"
		+ "            -planes 1\n"
		+ "            -lights 1\n"
		+ "            -cameras 1\n"
		+ "            -controlVertices 1\n"
		+ "            -hulls 1\n"
		+ "            -grid 1\n"
		+ "            -joints 1\n"
		+ "            -ikHandles 1\n"
		+ "            -deformers 1\n"
		+ "            -dynamics 1\n"
		+ "            -locators 1\n"
		+ "            -dimensions 1\n"
		+ "            -handles 1\n"
		+ "            -pivots 1\n"
		+ "            -textures 1\n"
		+ "            $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"modelPanel\" \"Side View\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `modelPanel -unParent -l \"Side View\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = $panelName;\n"
		+ "            modelEditor -e \n"
		+ "                -camera \"side\" \n"
		+ "                -useInteractiveMode 0\n"
		+ "                -displayLights \"default\" \n"
		+ "                -displayAppearance \"wireframe\" \n"
		+ "                -activeOnly 0\n"
		+ "                -wireframeOnShaded 0\n"
		+ "                -bufferMode \"double\" \n"
		+ "                -twoSidedLighting 1\n"
		+ "                -backfaceCulling 0\n"
		+ "                -xray 0\n"
		+ "                -displayTextures 0\n"
		+ "                -textureMaxSize 1024\n"
		+ "                -sortTransparent 1\n"
		+ "                -nurbsCurves 1\n"
		+ "                -nurbsSurfaces 1\n"
		+ "                -polymeshes 1\n"
		+ "                -planes 1\n"
		+ "                -lights 1\n"
		+ "                -cameras 1\n"
		+ "                -controlVertices 1\n"
		+ "                -hulls 1\n"
		+ "                -grid 1\n"
		+ "                -joints 1\n"
		+ "                -ikHandles 1\n"
		+ "                -deformers 1\n"
		+ "                -dynamics 1\n"
		+ "                -locators 1\n"
		+ "                -dimensions 1\n"
		+ "                -handles 1\n"
		+ "                -pivots 1\n"
		+ "                -textures 1\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		modelPanel -edit -l \"Side View\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		$editorName = $panelName;\n"
		+ "        modelEditor -e \n"
		+ "            -camera \"side\" \n"
		+ "            -useInteractiveMode 0\n"
		+ "            -displayLights \"default\" \n"
		+ "            -displayAppearance \"wireframe\" \n"
		+ "            -activeOnly 0\n"
		+ "            -wireframeOnShaded 0\n"
		+ "            -bufferMode \"double\" \n"
		+ "            -twoSidedLighting 1\n"
		+ "            -backfaceCulling 0\n"
		+ "            -xray 0\n"
		+ "            -displayTextures 0\n"
		+ "            -textureMaxSize 1024\n"
		+ "            -sortTransparent 1\n"
		+ "            -nurbsCurves 1\n"
		+ "            -nurbsSurfaces 1\n"
		+ "            -polymeshes 1\n"
		+ "            -planes 1\n"
		+ "            -lights 1\n"
		+ "            -cameras 1\n"
		+ "            -controlVertices 1\n"
		+ "            -hulls 1\n"
		+ "            -grid 1\n"
		+ "            -joints 1\n"
		+ "            -ikHandles 1\n"
		+ "            -deformers 1\n"
		+ "            -dynamics 1\n"
		+ "            -locators 1\n"
		+ "            -dimensions 1\n"
		+ "            -handles 1\n"
		+ "            -pivots 1\n"
		+ "            -textures 1\n"
		+ "            $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"modelPanel\" \"Front View\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `modelPanel -unParent -l \"Front View\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = $panelName;\n"
		+ "            modelEditor -e \n"
		+ "                -camera \"front\" \n"
		+ "                -useInteractiveMode 0\n"
		+ "                -displayLights \"default\" \n"
		+ "                -displayAppearance \"wireframe\" \n"
		+ "                -activeOnly 0\n"
		+ "                -wireframeOnShaded 0\n"
		+ "                -bufferMode \"double\" \n"
		+ "                -twoSidedLighting 1\n"
		+ "                -backfaceCulling 0\n"
		+ "                -xray 0\n"
		+ "                -displayTextures 0\n"
		+ "                -textureMaxSize 1024\n"
		+ "                -sortTransparent 1\n"
		+ "                -nurbsCurves 1\n"
		+ "                -nurbsSurfaces 1\n"
		+ "                -polymeshes 1\n"
		+ "                -planes 1\n"
		+ "                -lights 1\n"
		+ "                -cameras 1\n"
		+ "                -controlVertices 1\n"
		+ "                -hulls 1\n"
		+ "                -grid 1\n"
		+ "                -joints 1\n"
		+ "                -ikHandles 1\n"
		+ "                -deformers 1\n"
		+ "                -dynamics 1\n"
		+ "                -locators 1\n"
		+ "                -dimensions 1\n"
		+ "                -handles 1\n"
		+ "                -pivots 1\n"
		+ "                -textures 1\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		modelPanel -edit -l \"Front View\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		$editorName = $panelName;\n"
		+ "        modelEditor -e \n"
		+ "            -camera \"front\" \n"
		+ "            -useInteractiveMode 0\n"
		+ "            -displayLights \"default\" \n"
		+ "            -displayAppearance \"wireframe\" \n"
		+ "            -activeOnly 0\n"
		+ "            -wireframeOnShaded 0\n"
		+ "            -bufferMode \"double\" \n"
		+ "            -twoSidedLighting 1\n"
		+ "            -backfaceCulling 0\n"
		+ "            -xray 0\n"
		+ "            -displayTextures 0\n"
		+ "            -textureMaxSize 1024\n"
		+ "            -sortTransparent 1\n"
		+ "            -nurbsCurves 1\n"
		+ "            -nurbsSurfaces 1\n"
		+ "            -polymeshes 1\n"
		+ "            -planes 1\n"
		+ "            -lights 1\n"
		+ "            -cameras 1\n"
		+ "            -controlVertices 1\n"
		+ "            -hulls 1\n"
		+ "            -grid 1\n"
		+ "            -joints 1\n"
		+ "            -ikHandles 1\n"
		+ "            -deformers 1\n"
		+ "            -dynamics 1\n"
		+ "            -locators 1\n"
		+ "            -dimensions 1\n"
		+ "            -handles 1\n"
		+ "            -pivots 1\n"
		+ "            -textures 1\n"
		+ "            $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"modelPanel\" \"Persp View\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `modelPanel -unParent -l \"Persp View\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = $panelName;\n"
		+ "            modelEditor -e \n"
		+ "                -camera \"persp\" \n"
		+ "                -useInteractiveMode 0\n"
		+ "                -displayLights \"default\" \n"
		+ "                -displayAppearance \"wireframe\" \n"
		+ "                -activeOnly 0\n"
		+ "                -wireframeOnShaded 0\n"
		+ "                -bufferMode \"double\" \n"
		+ "                -twoSidedLighting 1\n"
		+ "                -backfaceCulling 0\n"
		+ "                -xray 0\n"
		+ "                -displayTextures 0\n"
		+ "                -textureMaxSize 1024\n"
		+ "                -sortTransparent 1\n"
		+ "                -nurbsCurves 1\n"
		+ "                -nurbsSurfaces 1\n"
		+ "                -polymeshes 1\n"
		+ "                -planes 1\n"
		+ "                -lights 1\n"
		+ "                -cameras 1\n"
		+ "                -controlVertices 1\n"
		+ "                -hulls 1\n"
		+ "                -grid 1\n"
		+ "                -joints 1\n"
		+ "                -ikHandles 1\n"
		+ "                -deformers 1\n"
		+ "                -dynamics 1\n"
		+ "                -locators 1\n"
		+ "                -dimensions 1\n"
		+ "                -handles 1\n"
		+ "                -pivots 1\n"
		+ "                -textures 1\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		modelPanel -edit -l \"Persp View\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		$editorName = $panelName;\n"
		+ "        modelEditor -e \n"
		+ "            -camera \"persp\" \n"
		+ "            -useInteractiveMode 0\n"
		+ "            -displayLights \"default\" \n"
		+ "            -displayAppearance \"wireframe\" \n"
		+ "            -activeOnly 0\n"
		+ "            -wireframeOnShaded 0\n"
		+ "            -bufferMode \"double\" \n"
		+ "            -twoSidedLighting 1\n"
		+ "            -backfaceCulling 0\n"
		+ "            -xray 0\n"
		+ "            -displayTextures 0\n"
		+ "            -textureMaxSize 1024\n"
		+ "            -sortTransparent 1\n"
		+ "            -nurbsCurves 1\n"
		+ "            -nurbsSurfaces 1\n"
		+ "            -polymeshes 1\n"
		+ "            -planes 1\n"
		+ "            -lights 1\n"
		+ "            -cameras 1\n"
		+ "            -controlVertices 1\n"
		+ "            -hulls 1\n"
		+ "            -grid 1\n"
		+ "            -joints 1\n"
		+ "            -ikHandles 1\n"
		+ "            -deformers 1\n"
		+ "            -dynamics 1\n"
		+ "            -locators 1\n"
		+ "            -dimensions 1\n"
		+ "            -handles 1\n"
		+ "            -pivots 1\n"
		+ "            -textures 1\n"
		+ "            $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"outlinerPanel\" \"Outliner\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `outlinerPanel -unParent -l \"Outliner\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = $panelName;\n"
		+ "            outlinerEditor -e \n"
		+ "                -mainListConnection \"worldList\" \n"
		+ "                -selectionConnection \"modelList\" \n"
		+ "                -showShapes 0\n"
		+ "                -showAttributes 0\n"
		+ "                -showConnected 0\n"
		+ "                -showAnimCurvesOnly 0\n"
		+ "                -autoExpand 0\n"
		+ "                -showDagOnly 1\n"
		+ "                -ignoreDagHierarchy 0\n"
		+ "                -expandConnections 0\n"
		+ "                -showUnitlessCurves 1\n"
		+ "                -showCompounds 1\n"
		+ "                -showNumericAttrsOnly 0\n"
		+ "                -highlightActive 1\n"
		+ "                -autoSelectNewObjects 0\n"
		+ "                -doNotSelectNewObjects 0\n"
		+ "                -dropIsParent 1\n"
		+ "                -transmitFilters 0\n"
		+ "                -setFilter \"defaultSetFilter\" \n"
		+ "                -showSetMembers 1\n"
		+ "                -allowMultiSelection 1\n"
		+ "                -alwaysToggleSelect 0\n"
		+ "                -directSelect 0\n"
		+ "                -displayMode \"DAG\" \n"
		+ "                -expandObjects 0\n"
		+ "                -setsIgnoreFilters 1\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		outlinerPanel -edit -l \"Outliner\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		$editorName = $panelName;\n"
		+ "        outlinerEditor -e \n"
		+ "            -mainListConnection \"worldList\" \n"
		+ "            -selectionConnection \"modelList\" \n"
		+ "            -showShapes 0\n"
		+ "            -showAttributes 0\n"
		+ "            -showConnected 0\n"
		+ "            -showAnimCurvesOnly 0\n"
		+ "            -autoExpand 0\n"
		+ "            -showDagOnly 1\n"
		+ "            -ignoreDagHierarchy 0\n"
		+ "            -expandConnections 0\n"
		+ "            -showUnitlessCurves 1\n"
		+ "            -showCompounds 1\n"
		+ "            -showNumericAttrsOnly 0\n"
		+ "            -highlightActive 1\n"
		+ "            -autoSelectNewObjects 0\n"
		+ "            -doNotSelectNewObjects 0\n"
		+ "            -dropIsParent 1\n"
		+ "            -transmitFilters 0\n"
		+ "            -setFilter \"defaultSetFilter\" \n"
		+ "            -showSetMembers 1\n"
		+ "            -allowMultiSelection 1\n"
		+ "            -alwaysToggleSelect 0\n"
		+ "            -directSelect 0\n"
		+ "            -displayMode \"DAG\" \n"
		+ "            -expandObjects 0\n"
		+ "            -setsIgnoreFilters 1\n"
		+ "            $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"graphEditor\" \"Graph Editor\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"graphEditor\" -l \"Graph Editor\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = ($panelName+\"OutlineEd\");\n"
		+ "            outlinerEditor -e \n"
		+ "                -mainListConnection \"graphEditorList\" \n"
		+ "                -selectionConnection \"graphEditor1FromOutliner\" \n"
		
		+ "                -highlightConnection \"keyframeList\" \n"
		+ "                -showShapes 1\n"
		+ "                -showAttributes 1\n"
		+ "                -showConnected 1\n"
		+ "                -showAnimCurvesOnly 1\n"
		+ "                -autoExpand 1\n"
		+ "                -showDagOnly 0\n"
		+ "                -ignoreDagHierarchy 0\n"
		+ "                -expandConnections 1\n"
		+ "                -showUnitlessCurves 1\n"
		+ "                -showCompounds 0\n"
		+ "                -showNumericAttrsOnly 1\n"
		+ "                -highlightActive 0\n"
		+ "                -autoSelectNewObjects 1\n"
		+ "                -doNotSelectNewObjects 0\n"
		+ "                -dropIsParent 1\n"
		+ "                -transmitFilters 1\n"
		+ "                -setFilter \"0\" \n"
		+ "                -showSetMembers 0\n"
		+ "                -allowMultiSelection 1\n"
		+ "                -alwaysToggleSelect 0\n"
		+ "                -directSelect 0\n"
		+ "                -displayMode \"DAG\" \n"
		+ "                -expandObjects 0\n"
		+ "                -setsIgnoreFilters 1\n"
		+ "                $editorName;\n"
		+ "			$editorName = ($panelName+\"GraphEd\");\n"
		+ "            animCurveEditor -e \n"
		+ "                -mainListConnection \"graphEditor1FromOutliner\" \n"
		
		+ "                -displayKeys 1\n"
		+ "                -displayTangents 0\n"
		+ "                -displayActiveKeys 0\n"
		+ "                -displayActiveKeyTangents 1\n"
		+ "                -displayInfinities 0\n"
		+ "                -autoFit 0\n"
		+ "                -snapTime \"none\" \n"
		+ "                -snapValue \"none\" \n"
		+ "                -showResults \"off\" \n"
		+ "                -showBufferCurves \"off\" \n"
		+ "                -smoothness \"fine\" \n"
		+ "                -resultSamples 1\n"
		+ "                -resultScreenSamples 0\n"
		+ "                -resultUpdate \"delayed\" \n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Graph Editor\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "			$editorName = ($panelName+\"OutlineEd\");\n"
		+ "            outlinerEditor -e \n"
		+ "                -mainListConnection \"graphEditorList\" \n"
		+ "                -selectionConnection \"graphEditor1FromOutliner\" \n"
		
		+ "                -highlightConnection \"keyframeList\" \n"
		+ "                -showShapes 1\n"
		+ "                -showAttributes 1\n"
		+ "                -showConnected 1\n"
		+ "                -showAnimCurvesOnly 1\n"
		+ "                -autoExpand 1\n"
		+ "                -showDagOnly 0\n"
		+ "                -ignoreDagHierarchy 0\n"
		+ "                -expandConnections 1\n"
		+ "                -showUnitlessCurves 1\n"
		+ "                -showCompounds 0\n"
		+ "                -showNumericAttrsOnly 1\n"
		+ "                -highlightActive 0\n"
		+ "                -autoSelectNewObjects 1\n"
		+ "                -doNotSelectNewObjects 0\n"
		+ "                -dropIsParent 1\n"
		+ "                -transmitFilters 1\n"
		+ "                -setFilter \"0\" \n"
		+ "                -showSetMembers 0\n"
		+ "                -allowMultiSelection 1\n"
		+ "                -alwaysToggleSelect 0\n"
		+ "                -directSelect 0\n"
		+ "                -displayMode \"DAG\" \n"
		+ "                -expandObjects 0\n"
		+ "                -setsIgnoreFilters 1\n"
		+ "                $editorName;\n"
		+ "			$editorName = ($panelName+\"GraphEd\");\n"
		+ "            animCurveEditor -e \n"
		+ "                -mainListConnection \"graphEditor1FromOutliner\" \n"
		
		+ "                -displayKeys 1\n"
		+ "                -displayTangents 0\n"
		+ "                -displayActiveKeys 0\n"
		+ "                -displayActiveKeyTangents 1\n"
		+ "                -displayInfinities 0\n"
		+ "                -autoFit 0\n"
		+ "                -snapTime \"none\" \n"
		+ "                -snapValue \"none\" \n"
		+ "                -showResults \"off\" \n"
		+ "                -showBufferCurves \"off\" \n"
		+ "                -smoothness \"fine\" \n"
		+ "                -resultSamples 1\n"
		+ "                -resultScreenSamples 0\n"
		+ "                -resultUpdate \"delayed\" \n"
		+ "                $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"dopeSheetPanel\" \"Dope Sheet\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"dopeSheetPanel\" -l \"Dope Sheet\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = ($panelName+\"OutlineEd\");\n"
		+ "            outlinerEditor -e \n"
		+ "                -mainListConnection \"animationList\" \n"
		+ "                -selectionConnection \"dopeSheetPanel1OutlinerSelection\" \n"
		
		+ "                -highlightConnection \"keyframeList\" \n"
		+ "                -showShapes 1\n"
		+ "                -showAttributes 1\n"
		+ "                -showConnected 1\n"
		+ "                -showAnimCurvesOnly 1\n"
		+ "                -autoExpand 0\n"
		+ "                -showDagOnly 0\n"
		+ "                -ignoreDagHierarchy 0\n"
		+ "                -expandConnections 1\n"
		+ "                -showUnitlessCurves 0\n"
		+ "                -showCompounds 1\n"
		+ "                -showNumericAttrsOnly 1\n"
		+ "                -highlightActive 0\n"
		+ "                -autoSelectNewObjects 0\n"
		+ "                -doNotSelectNewObjects 1\n"
		+ "                -dropIsParent 1\n"
		+ "                -transmitFilters 0\n"
		+ "                -setFilter \"0\" \n"
		+ "                -showSetMembers 0\n"
		+ "                -allowMultiSelection 1\n"
		+ "                -alwaysToggleSelect 0\n"
		+ "                -directSelect 0\n"
		+ "                -displayMode \"DAG\" \n"
		+ "                -expandObjects 0\n"
		+ "                -setsIgnoreFilters 1\n"
		+ "                $editorName;\n"
		+ "			$editorName = ($panelName+\"DopeSheetEd\");\n"
		+ "            dopeSheetEditor -e \n"
		+ "                -mainListConnection \"dopeSheetPanel1FromOutliner\" \n"
		
		+ "                -highlightConnection \"dopeSheetPanel1OutlinerSelection\" \n"
		
		+ "                -displayKeys 1\n"
		+ "                -displayTangents 0\n"
		+ "                -displayActiveKeys 0\n"
		+ "                -displayActiveKeyTangents 0\n"
		+ "                -displayInfinities 0\n"
		+ "                -autoFit 0\n"
		+ "                -snapTime \"integer\" \n"
		+ "                -snapValue \"none\" \n"
		+ "                -outliner \"dopeSheetPanel1OutlineEd\" \n"
		+ "                -showSummary 1\n"
		+ "                -showScene 0\n"
		+ "                -hierarchyBelow 0\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Dope Sheet\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "			$editorName = ($panelName+\"OutlineEd\");\n"
		+ "            outlinerEditor -e \n"
		+ "                -mainListConnection \"animationList\" \n"
		+ "                -selectionConnection \"dopeSheetPanel1OutlinerSelection\" \n"
		
		+ "                -highlightConnection \"keyframeList\" \n"
		+ "                -showShapes 1\n"
		+ "                -showAttributes 1\n"
		+ "                -showConnected 1\n"
		+ "                -showAnimCurvesOnly 1\n"
		+ "                -autoExpand 0\n"
		+ "                -showDagOnly 0\n"
		+ "                -ignoreDagHierarchy 0\n"
		+ "                -expandConnections 1\n"
		+ "                -showUnitlessCurves 0\n"
		+ "                -showCompounds 1\n"
		+ "                -showNumericAttrsOnly 1\n"
		+ "                -highlightActive 0\n"
		+ "                -autoSelectNewObjects 0\n"
		+ "                -doNotSelectNewObjects 1\n"
		+ "                -dropIsParent 1\n"
		+ "                -transmitFilters 0\n"
		+ "                -setFilter \"0\" \n"
		+ "                -showSetMembers 0\n"
		+ "                -allowMultiSelection 1\n"
		+ "                -alwaysToggleSelect 0\n"
		+ "                -directSelect 0\n"
		+ "                -displayMode \"DAG\" \n"
		+ "                -expandObjects 0\n"
		+ "                -setsIgnoreFilters 1\n"
		+ "                $editorName;\n"
		+ "			$editorName = ($panelName+\"DopeSheetEd\");\n"
		+ "            dopeSheetEditor -e \n"
		+ "                -mainListConnection \"dopeSheetPanel1FromOutliner\" \n"
		
		+ "                -highlightConnection \"dopeSheetPanel1OutlinerSelection\" \n"
		
		+ "                -displayKeys 1\n"
		+ "                -displayTangents 0\n"
		+ "                -displayActiveKeys 0\n"
		+ "                -displayActiveKeyTangents 0\n"
		+ "                -displayInfinities 0\n"
		+ "                -autoFit 0\n"
		+ "                -snapTime \"integer\" \n"
		+ "                -snapValue \"none\" \n"
		+ "                -outliner \"dopeSheetPanel1OutlineEd\" \n"
		+ "                -showSummary 1\n"
		+ "                -showScene 0\n"
		+ "                -hierarchyBelow 0\n"
		+ "                $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"hyperGraphPanel\" \"Hypergraph\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"hyperGraphPanel\" -l \"Hypergraph\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = ($panelName+\"HyperGraphEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 0\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"DAG\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Hypergraph\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "			$editorName = ($panelName+\"HyperGraphEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 0\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"DAG\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"hyperShadePanel\" \"Hypershade\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"hyperShadePanel\" -l \"Hypershade\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = ($panelName+\"HyperShadeEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 1\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"HyperShade\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "			$editorName = ($panelName+\"VisorEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 0\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"Visor\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "visor -reset hyperShadePanel1VisorEd;\n"
		+ "visor -addFolder -name \"Rendering\" -parent \"\" -openDirectories 1  hyperShadePanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Rendering\" -type command -cmd \"ls -type camera -type imagePlane\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Rendering\" -type command -cmd \"ls -type light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultShaderList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Rendering\" -type command -cmd \"ls -type opticalFX -type shaderGlow\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultTextureList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Rendering\" -type connectedNodes -cmd \"ls -type defaultRenderUtilityList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Create\" -parent \"\" -openDirectories 1  hyperShadePanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Create\" -type defaultNodes -cmd \"cameraCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Create\" -openFolder 1 -type defaultNodes -cmd \"listNodeTypes \\\"shader/surface\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Volume\" -parent \"Create/Materials\" -type defaultNodes -cmd \"listNodeTypes \\\"shader/volume\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Create\" -type defaultNodes -cmd \"postProcessCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Create\" -openFolder 1 -type defaultNodes -cmd \"listNodeTypes texture\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Create\"  hyperShadePanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Color\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/color\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"General\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/general\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Particle\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/particle\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Switch\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/switch\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"\" -parent \"\" -openDirectories 1 -type directoryCommand -cmd \"currentProjectParentDir()\" $editorName;\n"
		
		+ "visor -rebuild hyperShadePanel1VisorEd;\n"
		+ ";\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Hypershade\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "			$editorName = ($panelName+\"HyperShadeEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 1\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"HyperShade\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "			$editorName = ($panelName+\"VisorEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 0\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"Visor\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "visor -reset hyperShadePanel1VisorEd;\n"
		+ "visor -addFolder -name \"Rendering\" -parent \"\" -openDirectories 1  hyperShadePanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Rendering\" -type command -cmd \"ls -type camera -type imagePlane\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Rendering\" -type command -cmd \"ls -type light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultShaderList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Rendering\" -type command -cmd \"ls -type opticalFX -type shaderGlow\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultTextureList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Rendering\" -type connectedNodes -cmd \"ls -type defaultRenderUtilityList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Create\" -parent \"\" -openDirectories 1  hyperShadePanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Create\" -type defaultNodes -cmd \"cameraCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Create\" -openFolder 1 -type defaultNodes -cmd \"listNodeTypes \\\"shader/surface\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Volume\" -parent \"Create/Materials\" -type defaultNodes -cmd \"listNodeTypes \\\"shader/volume\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Create\" -type defaultNodes -cmd \"postProcessCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Create\" -openFolder 1 -type defaultNodes -cmd \"listNodeTypes texture\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Create\"  hyperShadePanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Color\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/color\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"General\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/general\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Particle\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/particle\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Switch\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/switch\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"\" -parent \"\" -openDirectories 1 -type directoryCommand -cmd \"currentProjectParentDir()\" $editorName;\n"
		
		+ "visor -rebuild hyperShadePanel1VisorEd;\n"
		+ ";\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"visorPanel\" \"Visor\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"visorPanel\" -l \"Visor\" -mbv $menusOkayInPanels `;\n"
		
		+ "			$editorName = ($panelName+\"VisorEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 0\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"Visor\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "visor -reset visorPanel1VisorEd;\n"
		+ "visor -addFolder -name \"Rendering\" -parent \"\" -openDirectories 1  visorPanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Rendering\" -type command -cmd \"ls -type camera -type imagePlane\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Rendering\" -type command -cmd \"ls -type light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultShaderList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Rendering\" -type command -cmd \"ls -type opticalFX -type shaderGlow\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultTextureList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Rendering\" -type connectedNodes -cmd \"ls -type defaultRenderUtilityList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Create\" -parent \"\" -openDirectories 1  visorPanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Create\" -type defaultNodes -cmd \"cameraCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes \\\"shader/surface\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Volume\" -parent \"Create/Materials\" -type defaultNodes -cmd \"listNodeTypes \\\"shader/volume\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Create\" -type defaultNodes -cmd \"postProcessCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes texture\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Create\"  visorPanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Color\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/color\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"General\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/general\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Particle\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/particle\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Switch\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/switch\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"\" -parent \"\" -openDirectories 1 -type directoryCommand -cmd \"currentProjectParentDir()\" $editorName;\n"
		
		+ "visor -rebuild visorPanel1VisorEd;\n"
		+ ";\n"
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Visor\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "			$editorName = ($panelName+\"VisorEd\");\n"
		+ "            hyperGraph -e \n"
		+ "                -orientation \"horiz\" \n"
		+ "                -animateTransition 0\n"
		+ "                -showShapes 0\n"
		+ "                -showDeformers 0\n"
		+ "                -showExpressions 0\n"
		+ "                -showConstraints 0\n"
		+ "                -showUnderworld 0\n"
		+ "                -showInvisible 0\n"
		+ "                -transitionFrames 1\n"
		+ "                -freeform 0\n"
		+ "                -imageEnabled 0\n"
		+ "                -graphType \"Visor\" \n"
		+ "                -updateSelection 1\n"
		+ "                -updateNodeAdded 1\n"
		+ "                $editorName;\n"
		+ "visor -reset visorPanel1VisorEd;\n"
		+ "visor -addFolder -name \"Rendering\" -parent \"\" -openDirectories 1  visorPanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Rendering\" -type command -cmd \"ls -type camera -type imagePlane\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Rendering\" -type command -cmd \"ls -type light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultShaderList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Rendering\" -type command -cmd \"ls -type opticalFX -type shaderGlow\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Rendering\" -openFolder 1 -type connectedNodes -cmd \"ls -type defaultTextureList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Rendering\" -type connectedNodes -cmd \"ls -type defaultRenderUtilityList\" $editorName;\n"
		
		+ "visor -addFolder -name \"Create\" -parent \"\" -openDirectories 1  visorPanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Cameras\" -parent \"Create\" -type defaultNodes -cmd \"cameraCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Lights\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes light\" $editorName;\n"
		
		+ "visor -addFolder -name \"Materials\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes \\\"shader/surface\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Volume\" -parent \"Create/Materials\" -type defaultNodes -cmd \"listNodeTypes \\\"shader/volume\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Post Process\" -parent \"Create\" -type defaultNodes -cmd \"postProcessCreateFolder()\" $editorName;\n"
		
		+ "visor -addFolder -name \"Textures\" -parent \"Create\" -type defaultNodes -cmd \"listNodeTypes texture\" $editorName;\n"
		
		+ "visor -addFolder -name \"Utilities\" -parent \"Create\"  visorPanel1VisorEd;\n"
		
		+ "visor -addFolder -name \"Color\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/color\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"General\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/general\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Particle\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/particle\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"Switch\" -parent \"Create/Utilities\" -type defaultNodes -cmd \"listNodeTypes \\\"utility/switch\\\"\" $editorName;\n"
		
		+ "visor -addFolder -name \"\" -parent \"\" -openDirectories 1 -type directoryCommand -cmd \"currentProjectParentDir()\" $editorName;\n"
		
		+ "visor -rebuild visorPanel1VisorEd;\n"
		+ ";\n"
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"polyTexturePlacementPanel\" \"Texture View\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"polyTexturePlacementPanel\" -l \"Texture View\" -mbv $menusOkayInPanels `;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Texture View\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"multiListerPanel\" \"Multilister\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"multiListerPanel\" -l \"Multilister\" -mbv $menusOkayInPanels `;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Multilister\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"renderWindowPanel\" \"Render View\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"renderWindowPanel\" -l \"Render View\" -mbv $menusOkayInPanels `;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Render View\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"blendShapePanel\" \"Blend Shape\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			blendShapePanel -unParent -l \"Blend Shape\" -mbv $menusOkayInPanels ;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		blendShapePanel -edit -l \"Blend Shape\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"dynRelEdPanel\" \"Dynamic Relationships\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"dynRelEdPanel\" -l \"Dynamic Relationships\" -mbv $menusOkayInPanels `;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Dynamic Relationships\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextPanel \"devicePanel\" \"Devices\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			devicePanel -unParent -l \"Devices\" -mbv $menusOkayInPanels ;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		devicePanel -edit -l \"Devices\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"relationshipPanel\" \"Relationship Editor\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"relationshipPanel\" -l \"Relationship Editor\" -mbv $menusOkayInPanels `;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Relationship Editor\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	$panelName = `sceneUIReplacement -getNextScriptedPanel \"referenceEditorPanel\" \"Reference Editor\"`;\n"
		
		+ "	if (\"\" == $panelName) {\n"
		+ "		if ($useSceneConfig) {\n"
		+ "			$panelName = `scriptedPanel -unParent  -type \"referenceEditorPanel\" -l \"Reference Editor\" -mbv $menusOkayInPanels `;\n"
		
		+ "		}\n"
		+ "	} else {\n"
		+ "		$label = `panel -q -label $panelName`;\n"
		+ "		scriptedPanel -edit -l \"Reference Editor\" -mbv $menusOkayInPanels  $panelName;\n"
		
		+ "		if (!$useSceneConfig) {\n"
		+ "			panel -e -l $label $panelName;\n"
		+ "		}\n"
		+ "	}\n"
		+ "	if ($useSceneConfig) {\n"
		+ "        string $configName = `getPanel -cwl \"Current Layout\"`;\n"
		
		+ "        if (\"\" != $configName) {\n"
		+ "			panelConfiguration -edit -label \"Current Layout\"\n"
		+ "				-sc false\n"
		+ "				-configString \"paneLayout -e -cn \\\"single\\\" -ps 1 100 100 $gMainPane;\"\n"
		
		+ "				-removeAllPanels\n"
		+ "				-ap true\n"
		+ "					\"Persp View\"\n"
		+ "					\"modelPanel\"\n"
		+ "					\"$panelName = `modelPanel -unParent -l \\\"Persp View\\\" -mbv $menusOkayInPanels `;\\n$editorName = $panelName;\\nmodelEditor -e \\n    -cam `findStartUpCamera persp` \\n    -useInteractiveMode 0\\n    -displayLights \\\"default\\\" \\n    -displayAppearance \\\"wireframe\\\" \\n    -activeOnly 0\\n    -wireframeOnShaded 0\\n    -bufferMode \\\"double\\\" \\n    -twoSidedLighting 1\\n    -backfaceCulling 0\\n    -xray 0\\n    -displayTextures 0\\n    -textureMaxSize 1024\\n    -sortTransparent 1\\n    -nurbsCurves 1\\n    -nurbsSurfaces 1\\n    -polymeshes 1\\n    -planes 1\\n    -lights 1\\n    -cameras 1\\n    -controlVertices 1\\n    -hulls 1\\n    -grid 1\\n    -joints 1\\n    -ikHandles 1\\n    -deformers 1\\n    -dynamics 1\\n    -locators 1\\n    -dimensions 1\\n    -handles 1\\n    -pivots 1\\n    -textures 1\\n    $editorName\"\n"
		
		+ "					\"modelPanel -edit -l \\\"Persp View\\\" -mbv $menusOkayInPanels  $panelName;\\n$editorName = $panelName;\\nmodelEditor -e \\n    -cam `findStartUpCamera persp` \\n    -useInteractiveMode 0\\n    -displayLights \\\"default\\\" \\n    -displayAppearance \\\"wireframe\\\" \\n    -activeOnly 0\\n    -wireframeOnShaded 0\\n    -bufferMode \\\"double\\\" \\n    -twoSidedLighting 1\\n    -backfaceCulling 0\\n    -xray 0\\n    -displayTextures 0\\n    -textureMaxSize 1024\\n    -sortTransparent 1\\n    -nurbsCurves 1\\n    -nurbsSurfaces 1\\n    -polymeshes 1\\n    -planes 1\\n    -lights 1\\n    -cameras 1\\n    -controlVertices 1\\n    -hulls 1\\n    -grid 1\\n    -joints 1\\n    -ikHandles 1\\n    -deformers 1\\n    -dynamics 1\\n    -locators 1\\n    -dimensions 1\\n    -handles 1\\n    -pivots 1\\n    -textures 1\\n    $editorName\"\n"
		
		+ "				$configName;\n"
		+ "            setNamedPanelLayout \"Current Layout\";\n"
		+ "        }\n"
		+ "        panelHistory -e -clear mainPanelHistory;\n"
		+ "        setFocus `paneLayout -q -p1 $gMainPane`;\n"
		+ "        sceneUIReplacement -deleteRemaining;\n"
		+ "        sceneUIReplacement -clear;\n"
		+ "	}\n"
		+ "	grid -spacing 5cm -size 12cm -divisions 5 -style 3;\n"
		+ "}\n");
	setAttr ".st" 3;
createNode script -n "animationScriptNode";
	setAttr ".a" -type "string" (
		"playbackOptions -min -1 -max 200 -animationStartTime -1 -animationEndTime 200;"
		);
select -ne :time1;
	setAttr ".o" -1;
select -ne :renderPartition;
	setAttr -s 2 ".st";
select -ne :renderGlobalsList1;
select -ne :defaultShaderList1;
	setAttr -s 2 ".s";
select -ne :postProcessList1;
	setAttr -s 2 ".p";
select -ne :lightList1;
select -ne :initialShadingGroup;
	setAttr -s 18 ".dsm";
	setAttr ".ro" yes;
select -ne :initialParticleSE;
	setAttr ".ro" yes;
select -ne :hyperGraphLayout;
	setAttr ".cch" no;
	setAttr ".ihi" 2;
	setAttr ".nds" 0;
	setAttr ".img" -type "string" "";
	setAttr ".ims" 1;
connectAttr "ffFilletSrf3.os" "freeformFilletSurfaceShape3.cr";
connectAttr "makeNurbCylinder1.os" "nurbsCylinderShape1.cr";
connectAttr "makeNurbCube1.os" "topnurbsCubeShape1.cr";
connectAttr "makeNurbCube1.os1" "bottomnurbsCubeShape1.cr";
connectAttr "makeNurbCube1.os2" "leftnurbsCubeShape1.cr";
connectAttr "makeNurbCube1.os3" "rightnurbsCubeShape1.cr";
connectAttr "makeNurbCube1.os4" "frontnurbsCubeShape1.cr";
connectAttr "makeNurbCube1.os5" "backnurbsCubeShape1.cr";
connectAttr "ffFilletSrf4.os" "freeformFilletSurfaceShape4.cr";
connectAttr "ffFilletSrf1.os" "freeformFilletSurfaceShape1.cr";
connectAttr "ffFilletSrf2.os" "freeformFilletSurfaceShape2.cr";
connectAttr "curveFromSurfaceIso5.oc" "ffFilletSrf3.lc";
connectAttr "curveFromSurfaceIso6.oc" "ffFilletSrf3.rc";
connectAttr "nurbsCylinderShape5.ws" "curveFromSurfaceIso5.is";
connectAttr "nurbsCylinderShape8.ws" "curveFromSurfaceIso6.is";
connectAttr "curveFromSurfaceIso7.oc" "ffFilletSrf4.lc";
connectAttr "curveFromSurfaceIso8.oc" "ffFilletSrf4.rc";
connectAttr "nurbsCylinderShape6.ws" "curveFromSurfaceIso7.is";
connectAttr "nurbsCylinderShape8.ws" "curveFromSurfaceIso8.is";
connectAttr "curveFromSurfaceIso1.oc" "ffFilletSrf1.lc";
connectAttr "curveFromSurfaceIso2.oc" "ffFilletSrf1.rc";
connectAttr "nurbsCylinderShape6.ws" "curveFromSurfaceIso1.is";
connectAttr "nurbsCylinderShape7.ws" "curveFromSurfaceIso2.is";
connectAttr "curveFromSurfaceIso3.oc" "ffFilletSrf2.lc";
connectAttr "curveFromSurfaceIso4.oc" "ffFilletSrf2.rc";
connectAttr "nurbsCylinderShape7.ws" "curveFromSurfaceIso3.is";
connectAttr "nurbsCylinderShape5.ws" "curveFromSurfaceIso4.is";
connectAttr ":defaultLightSet.msg" "lightLinker1.lnk[0].llnk";
connectAttr ":initialShadingGroup.msg" "lightLinker1.lnk[0].olnk";
connectAttr ":defaultLightSet.msg" "lightLinker1.lnk[1].llnk";
connectAttr ":initialParticleSE.msg" "lightLinker1.lnk[1].olnk";
connectAttr "layerManager.dli[0]" "defaultLayer.id";
connectAttr "lightLinker1.msg" ":lightList1.ln" -na;
connectAttr "nurbsCylinderShape1.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape2.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape3.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape4.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape5.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape6.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape7.iog" ":initialShadingGroup.dsm" -na;
connectAttr "nurbsCylinderShape8.iog" ":initialShadingGroup.dsm" -na;
connectAttr "freeformFilletSurfaceShape1.iog" ":initialShadingGroup.dsm"
		 -na;
connectAttr "freeformFilletSurfaceShape2.iog" ":initialShadingGroup.dsm"
		 -na;
connectAttr "freeformFilletSurfaceShape3.iog" ":initialShadingGroup.dsm"
		 -na;
connectAttr "freeformFilletSurfaceShape4.iog" ":initialShadingGroup.dsm"
		 -na;
connectAttr "topnurbsCubeShape1.iog" ":initialShadingGroup.dsm" -na;
connectAttr "bottomnurbsCubeShape1.iog" ":initialShadingGroup.dsm" -na;
connectAttr "leftnurbsCubeShape1.iog" ":initialShadingGroup.dsm" -na;
connectAttr "rightnurbsCubeShape1.iog" ":initialShadingGroup.dsm" -na;
connectAttr "frontnurbsCubeShape1.iog" ":initialShadingGroup.dsm" -na;
connectAttr "backnurbsCubeShape1.iog" ":initialShadingGroup.dsm" -na;
// End of base.ma